How to Choose the Right Flow Valves Manufacturer for Your Project

Flow Valves Manufacturer

If you’re looking for a new Flo-Fuse excess flow control valve, you’ve come to the right place. Learn about these excess flow control valves, as well as Gate valves, Diaphragm valves, and EFVs, and how to choose the best Flow Valves Manufacturer for your project. Flow Valves Manufacturers are proud to serve both commercial and industrial clients. For more information, contact them today.

Flo-Fuse excess flow control valve

A Flo-Fuse excess flow control valve can be used to limit or prevent an excessive flow of gas or liquid. The valve has a cylinder-like interior, which is threaded at both ends to couple with a conventional threaded pipeline. Upon valve closure, a small by-pass flow is permitted downstream. The valve is designed to close at a predetermined rate, which is dependent on the upstream flow rate.

Gate valves

Flow valves with a gate design are best for applications that need a high degree of flow control. The design of the gate prevents any obstruction from entering the flow path, resulting in minimal pressure loss. This makes gate valves an ideal choice for pipelines with varying flow directions. A typical gate valve will experience little or no sealing surface erosion when fully open and minimize pressure loss. To maximize efficiency, use gate valves only when they are fully open.

Diaphragm valves

If you are considering purchasing a diaphragm-valve for your next project, you need to know what to look for in these valves. Diaphragm valves, which are also known as butterfly valves, are designed to open and close by causing a pressure difference between the two parts. Diaphragm valves should be made from a rigid, corrosion-resistant material, and they should also have antimicrobial properties. If you need a valve for vacuum applications, you should select a diaphragm valve with a sealed-evacuated bonnet.


An EFV is a pressure regulating valve that automatically closes and opens when the flow rate exceeds the set point. It is designed to work when a large outflow is present, such as a total line rupture. If the outflow flow rate is small, it would not respond. The Center for Chemical Process Safety reports a case of an EFV failure because the outflow rate was too small. Fortunately, EFVs do not require a weep hole.

Ball valves

Flow valve manufacturers offer a variety of ball valves for different applications. The type of media is important for the material of the valve, as this determines the appropriate materials for the component. Another important feature is the valve actuation type, which describes how the valve works. There are three basic types of actuation: manual, hydraulic, and electrical. These valves vary in the amount of torque needed to open and close the valve.

More Posts

Check Valves Manufacturer

Check valves are a valve type that is used to prevent the backflow of media. These are also used in water treatment and for instrumentation

Types of Flow Valves Manufacturer

There are many different types of flow valves available in the market. They include plug valves, control valves, globe valves, check valves, and relief valves.